Contact Us

203 North Cutler Street
Greeneville, TN, 37745
United States

8889607484

MagVent magnetically aligned dryer vent couplings help boost dryer efficiency and safety by making it easy to run a minimum path vent for your clothes dryer. Learn which model MagVent dryer vent coupling can help you with your dryer's venting arrangement.

Blog

Filtering by Category: Dryer Vents

Installation of the MagVent was smooth and easy!

Kevin Kelley

Before

Before

After

After

“To make some improvements to our backyard so that our dryer didn't vent right onto the outdoor patio, we wanted to move our dryer vent discharge from the back of the house to the side of the house. The old route had an old inefficient outdoor dryer vent hood with non-functioning flapper on the back of the house, and due to the typical connection and access issues had to use the flimsy snaking foil duct to connect the dryer inside the house and push it back into place.

Luckily our laundry room is in the corner of the house. So the new installation includes a much more effective outdoor dryer vent closure out the less visible side of the house, and is a much shorter and more efficient indoor duct routing with less bends that will hopefully lead to better energy savings, less risk, faster drying, and can be easily moved as needed when we need to get a new dryer. The MagVent MV-90 was the final piece that made connecting the dryer and pushing back into place much easier. I was able to do everything myself, and installation of the MagVent was smooth and easy, and gets my recommendation.”

-Jon P.

"No more struggling to hook up the vent! Love it!"

Kevin Kelley

“Forgot before pictures, but I have always had trouble hooking up my dryer. That is, before I found this awesome product. Now I can slide my dryer back and it hooks itself up with its powerful magnet. No more laying over the top of my dryer struggling to hook up the vent! Love it!
Sincerely, -Jason A.”

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to boost dryer efficiency and save energy and space!

Easily installed MagVent in a tight spot!

Kevin Kelley

Before

Before

After

After

“Our washer & dryer are in a closet in a half bath, while I am grateful it is on the main floor of the house it is a tight spot. We were hoping that the washer and dryer would survive another year till we are able to tile the floor underneath it, my thought being, out with the old, put in new floor and have a new set delivered and hooked up. Well, a few weeks ago the washer stopped spinning, while the dryer worked, a new set was purchased. The washer came on the first delivery, the old dryer had to come out to remove the old washer and install new washer, yea! New washer! I said please be sure the dryer vent is hooked up when you push it hold dryer back in, they said it was, it was not, so for the next week I had steam & condensation running down the bathroom mirror anytime I dried a load of clothes.....UGH..... then the new dryer came, the delivery guys said the vents were not going to line up and there was nothing they could do about it......so I went to the hardware store and bought new flex pipe, clamps and a new 90 pipe.....I pulled the new dryer out and assessed the situation..... I sat there on the floor for awhile, frankly kinda pissed off at my predicament, and remembered seeing an ad on Facebook for MagVent,
I googled it, read the reviews, and ordered it, packed up all the stuff I got from the hardware store and returned it!!! I am 52, female, and quite handy with tools,, my husband is 71 and had just had an injection in his back and needs a new knee. I knew this project was up to me to fix. After watching the installation video, I was confident I could do it. The package arrived and I headed out to the garage too get the drill and tools I would need, he had a buddy with him in the garage, they both asked "whatcha doing?"..... I said, "you'll see"....I hooked that vent up like a pro, slid the dryer in and it worked like a dream! I returned the tools to the garage and told them what I had done, then I had to show them the online video so they could see how cool of a system it is! I have already recommended this system to others.
Thank you!”
-Angela R.

MagVent, LLC Customer Experience now on YouTube!

Kevin Kelley

MagVent, LLC provides excellent customer service from the minute the product is purchased. The MagVent technician walks through the entire process with the customer, demonstrates a thorough installation, and introduces the customer to his safer and much improved dryer vent situation. MagVent prides themselves on a quality product and customer satisfaction!

https://www.magvent-dryervent.com/

https://twitter.com/MagVentLLC https://

www.instagram.com/magventdryent

"Thanks for the brilliant product!!"

Kevin Kelley

“My washer and dryer are in a very tight closet and the walls are solid concrete. I needed to get the units as close to the back wall as possible so I could close the closet door. But it’s a blind connection so I needed too much vent hose to connect before pushing them back into place. It wouldn’t compress enough to allow the stacked machines to go back far enough. Then I found MagVent!

I am now able to slide the stacked machines into place without any concern of having a solid connection with the exhaust vent. Everything lines up perfectly and snaps into place automatically. MagVent works perfectly for this unique situation but would have also worked great in every house I have ever lived in. I move often and will be using MagVents in all my future projects.

Thanks for the brilliant product!!”

-Chris F.

MagVent saved the day!

Kevin Kelley

blog12(1).jpg
blog12(2).jpg
blog12(3).jpg
blog12(4).jpg

“Hello, MagVent saved the day!

After 3 weeks of running to the laundromat shuffling wet clothes around I finally decided to give the MagVent MV 90 a try.

I spent quite a few dollars prior, throughout the past few weeks trying to fix the dryer vent.

Now I am back in business!!.
Please see attached photos of before and after.

Thank you Magvent!!”
-Amanda D.

"When it's very tight to hook up a dryer we turn to MagVent!"

Kevin Kelley

We absolutely love hearing from satisfied customers! We were fortunate enough to be tagged in Southeast Kitchen and Bath’s story on Instagram this morning!

Capture.PNG

Don’t forget to check out their website at : http://www.palladinobuildinginc.com/ !

southeastkitchenandbath.png

A MagVent product, a properly designed duct system, and routine cleaning are the solutions to boost dryer efficiency and save energy and space!

It made my life so easy!

Kevin Kelley

blog10(1).jpg
blog10(2).jpg

Hi MagVent,

”When we moved into our new home one of the tasks I dreaded the most was installing my dryer.

I had seen a couple of YouTube videos and was curious about MagVent. I mentioned my curiosity to my brother n law who immediately began to rave about the MagVent he had recently purchased. So I took the plunge.

The moment I opened the box I was holding the best built dry vent I had ever held. It felts so sturdy. I looked at the space I had to work with at home and immediately felt confident I could knock this out with my handy new sidekick. MagVent made installation a breeze. I have included pictures of the before and after. I walked away feeling like a pro.

Thanks for this product. It made my life so easy.”

-Scott T.

"MagVent Saved My House!"

Kevin Kelley

“While doing some deep spring cleaning, we noticed how bad our dryer vent situation was! We called MagVent, and they were kind enough to send out a technician to look at our problem. I can’t believe what he showed us! Our dryer vent was completely occluded, and even had a large tear in it. He explained to us the dangers of improperly maintained dryer vents, and MagVent really did save our house! If that lint would’ve caught fire, I don’t like thinking about what could’ve happened. He had the MV-90 installed in less than an hour, and our brand new dryer vent looks amazing and works so much better! Thank you MagVent!”

-Thomas M.

"Bottom Line is This Product is Awesome!"

Kevin Kelley

blog21(1).jpg
blog21(2).jpg
blog21(3).jpg
blog21(4).jpg

“The first picture shows what had been my vent – short flex metal that was hard to align and did not have clamps on it; other pictures show installation.

 

Bottom line is this product is awesome and took about 30 minutes to install including cutting baseboard.  

One thing I noticed is that because the output of dryer is fluted and tapered I could not get the hose to not easily be pulled off.  I thought about running 2 screws but as I know those collect lint I dismissed that idea.  Instead I cut 2 little notches in the dryer output and bent them back to effectively create like fish hook barbs 180 degrees apart.  I then clamped hose on and it is not coming off.  This little addition is no reflection on MagVent but is something I have noticed no matter what I have ever tried to clamp to a tapered dryer output.

 

I highly recommend this product”


-Chuck T.

Thanks to all at MagVent. Great product and will definitely recommend!

Kevin Kelley

Before

Before

After

After

“Just installed the MV 90 behind my dryer. I’ve been meaning to “clean up” the previous install. The wad of flexible tubing was installed by the delivery guys when we ordered our new washer and dryer. Legal ... yes ... quality install ... not so much! I took some before and after pictures.

You can see the difference and how much clutter has been cleaned up. As a former full time professional firefighter for over 30 years I can attest to the dangers of improperly maintained dryer venting.

Thanks to all at Magvent. Great product and will definitely recommend.”

-Dave C.

Couldn’t be happier with quality and how it works!

Kevin Kelley

Before

Before

blog8(2).jpg
After

After


”Installation completed and works perfectly.  Before and after pictures are attached and speak for themselves. Could not have been easier. We are doing major remodel of our lower level and both carpenter and tile contractors remarked how well it looked and worked. They both wanted info on where I purchased the
MagVent so that they could get. Couldn’t be happier with quality and how it works!”

-John K.

Great product and I will recommend it to anybody!

Kevin Kelley

“I ordered a new washer & dryer set and I did not want to have the back of the dryer's flexible duct crunched the way it was with the old dryer. I knew that the old dryer was working hard to get air through that crunch flex duct. So I went about searching on YouTube for some options. I watched one video that required a pan installation, however, that required me cutting into the sheet rock without cutting any electrical wiring. So, I kept searching YouTube and ran across a video on your MV-90 system which lead to a video on the MV-180. Bing! The MV-180 my solution to my problem without having to cut into the sheet rock. I ordered the MV-180. I followed the instructions for installation, which by the way was simple and easy. Today my new dryer was delivered, finally after waiting for over a month due dealer mix-up for delivery. The delivery gentleman was impressed because he had not seen your type of dryer flex-duct system and of course it was going to attach the flex-duct the old fashion way to the exhaust port. He attached the flex-duct to the dryer exhaust port and extended the hose and presto. The magnetism did its job in self-aligning when we pushed the dryer into position. I truly thank you for your product and it was a work saver because I did not have to do any cutting into the sheet rock. Great product and I will recommend it to anybody that wants to close the space of their dryer in their laundry room, especially, those that have small laundry rooms. Once again, thank you for your product because it did the job and my dryer is closer to the wall without a crunched flex-duct!”

-James R.

"I really like this product, and had an excellent experience with the company's service!"

Kevin Kelley

“I am usually pretty critical in my reviews, unless I really like something. But I really like this product, and had an excellent experience with the company's service. The product is a great idea, but I have to say that it would be a good idea to go to their website before you buy, and check out the different options that are available. I had originally ordered an option that didn't quite work with my dryer. I wasn't able to push the dryer close enough to the wall to make the supplied duct reach. Had I visited their website I would have found an option that would have worked better. In the end, the service person was able to get me the right thing, and it works really well. Worth every penny as far as I'm concerned. Makes going behind the dryer much easier. If you have ever had to try to squeeze behind your dryer after moving it further than the duct would extend, clean or replace the exhaust duct, this thing makes attaching and detaching the exhaust duct from the wall exit (or whatever) very easy. It sure worked for me. I highly recommend it.”

-Michael S.

Website Table Tiles (2).jpg

Dryer Vent Safety: Regularly Servicing your Dryer

Kevin Kelley

It is always important to keep your dryer maintenanced. Improperly maintained dryer vents can not only be a fire hazard, but can cause health concerns as well. When a dryer is functioning properly, it eliminates moisture during the drying process. If a vent is not in working order, for example if it is crushed or blocked with lint, the moisture that is emitted during the drying cycle can be trapped which will lead to mold and bacteria in the venting system. This can lead to many respiratory problems in your household. As for gas dryers, lint or another type of blockage can prevent the exhaust fumes from exiting correctly, which can build up dangerous levels of harmful gasses such as carbon monoxide.

There are a myriad of warning signs that your dryer ventilation system needs servicing and/or cleaning. If you have any of the following issues, it might be time to take action!

-If laundry is taking too long to dry, or if it is still damp after the cycle has completed, that might signal that there is a blockage or restriction in the venting system.

-If there is excessive amounts of heat being emitted in the laundry room area, this can be a sign that there is backup in the ventilation system.

-If you can smell your laundry detergent or dryer sheets during the cycle when the dryer door is closed, this shows that there is improper air ventilation.

-Any loud noises, such as metal-on-metal or squeaking, shows that the dryer is working too hard and that the essential oils have dried out. This can cause overheating and can be very dangerous; this can cause sparks and possible fires to occur. A ticking noise can signal that a belt requires replacement.

-No noises coming from the dryer can also be a bad sign; this can show that the dryer has completely overheated and blown the thermal fuse.

Overall, it is a good idea to make sure that your dryer is serviced. This can prevent many safety issues and keep your appliances in good working order. A MagVent product, a properly designed duct system, and routine cleaning are the solutions to boost dryer efficiency and save energy and space!